Aaron Parecki

🔴 Live Q&A! ATEM Television Studio HD8 ISO Live Demo!

July 16, 2023

Questions

(3:01) Europe is present! We can start ;)

(3:05) Hi from Finland

(3:08) Hello from Dubai

(3:37) It’s Monday in New Zealand!!

(5:18) Q: does the unit come with hyperdeck controls from the device itself?

(7:46) Time to re-work Companion buttons anyway now that Companion v3.0 is released

(8:04) Q: does the unit come with hyperdeck controls from the device itself?

(17:29) I love this! Already. Thanks

(17:32) Q - will it select the clip with the Numpad and start with Enter?

(21:20) As UI goes, having a numpad is a step up from an Extreme for getting the IP into the HD8

(21:29) Fantastic it looks a lot like the advanced panel. Looks like there is no active need for the software during a show

(22:09) Q Is it good enough to purchase an advanced panel?

(23:41) Can you split audio to dual mono mode from the panel? I wasn’t able to find it when I used an HD8

(23:48) I wasnt able to split audio to dual mono mode on an input without the software

(25:38) Q - big Question - will that also work with PlayoutBee ? .. as it will show like a Hyperdeck ..

(26:02) Q: Would you ultimately create Companion config for this or just use the panel with ATEM software?

(27:29) Companion is Amazing. I live using it with the Streamdeck

(27:38) I'd love to be able to justify an Advanced panel for my main gig. If it wasn't so expensive, I'd probably grab one.

(27:47) Good point on the Advanced Panel, it's just a control surface for a physically separate ATEM switcher.

(28:55) Yeah. Like the audio from SDI 1 to dual mono

(28:57) Feels weird that you would need the software for it right

(29:08) i wish an ATEM Extreme ISO had MADI.

(30:02) any idea when 4K might get ISO? years?

(30:44) late, did you buy this or are you test driving it?

(30:56) Time for the ATEM Mini ULTRA ISO (with both HDMI and SDI, and Streaming inputs)

(31:11) hear hear, second that. must have balanced audio

(31:18) Can we play videos in slow-motion reply in this switcher ?

(39:37) Yolobox Pro is your Easy replay add-on

(39:42) Yeah the Yolobox has instant replay built-in

(40:02) The replay on the YoloBox Pro is a single tap which makes it pretty good for live sports

(40:08) man, yolobox and atem and epiphan all do several critical things better than their competitors. ugh

(40:26) Q: this is only sdi right? no hdmi?

(40:51) Aaron at 1/4 speed, uncanny 👀

(40:58) Great thanks

(41:42) So easy 👀😂

(41:45) will you get one?

(42:48) Q: Do you have the ability to delay each video input separately? I know you can delay audio so many frames on the ISO, but what about individual video inputs?

(44:08) Q The replay macro you made a few weeks ago would work with this?

(44:59) Q - any Idea that BMD build a extended Panel like the 2 ME in a Advanced Panel 20??

(45:12) I am Waiting for TVS 4k8 model

(47:47) The Advance Panel 20 is the biger Brother of the "regular" Advance Panel .. one higher is the AP 40 for 4 ME

(48:43) 20button Advanced Panel w/a 2M/E built-in I think was what @MT Steuerung was saying. More SDI I/O!!!

(48:55) Q - any Idea that BMD build a extended Panel like the 2 ME in a Advanced Panel 20??

(49:04) The Sony a6700 has usb-webcam 4K 30fps, incredible! We can use multiple Sony a6700 cameras and won’t need switchers.

(50:00) you'd need to build a 4th level for your house if you want to buy this device for the studio Aaron 😂

(50:12) @Aaron have you ever used the software that takes one high rez image (6K) and isolates areas as separate feeds? sure would be handy if it works

(52:22) have a look at matrox monach edge

(52:32) Sounds like an Epiphan product

(52:38) i'd just like one camera, for a podcast with 3 isolated areas for guests. hence 6K broken into several HDMIs

(53:02) Q: Aaron, what are your thoughts on the Speed Editor or Davinci Resolve Keyboard with the spin wheel? have you played with it?

(55:38) The Auxs allow you to use 8 of them as direct out for ISO recording through like an Atem mini ISO SDI

(57:27) "creative video tips" youtube channel has done a TON of speed editor content. FYI

(57:33) I use the speed editor on the edit page all the time. Job wheel, split and ripple delete is great. multi-cam editing in the edit tab is great as well.

(58:04) Sounds like tvu?

(58:06) Can take four cameras and send back over internet

(58:08) It’s like a backpack

(58:16) You could diy the str encoder/decoders with Mac minis and decklink cards

(58:25) Q what is the least cost way to convert hdmi to sdi that works with the hd8

(1:00:09) I have way too many of those converters lol

(1:00:10) B&H got a ton of money for these from me for this last gig I did

(1:00:29) David: yes on speed editor and great for rough cuts/edits: ie has palace in workflow. Not something I think is good for colouring etc...

(1:00:41) I wonder what kind of chroma subsampling the Sony cams offer via USB.

(1:00:47) Don't build a Tri-plex, and definitely don't build a Quad-plex 🤔

(1:01:33) Q: What is the best budget SRT encoder/decoder in your opinion ?

(1:06:13) It'd be great if I could get like 8 of them in a 1U form factor

(1:06:43) This is is fast becoming BMD Converters Anonymous support group

(1:06:49) Q: This is the issue I have and why I feel like I wouldn't be able to get this... The conversion from HDMI>CAT5e>HDMI>SDI Seems like latency time for all of this would not make it worth it

(1:08:54) Q: Can the Atem do "Point of interest" like the Roland mixers do? You can use one 4k camera and take several different 1080p shots out of it and use them as separate inputs on your mixer?

(1:15:01) It's rounding!

(1:15:09) 0.01 is 0.

(1:16:58) Pi = 3. Fight me!

(1:17:05) I posted a link in the last 2 weeks for a 1U rack mount that holds 8 of the BMD Mini Converters, and includes a power supply to power them all. I will see if I can find it again.

(1:17:29) is the decimator better for multi converts?

(1:18:05) Wait! there's a discord? for members?

(1:18:23) @David Hunte You can also click on the 'See perks' button under any of his videos for the link.

(1:18:29) Can we build a custom Talkback solution using ATEM HD8 on control room side and a Captive Tech Based Solution on the Camera-man(s) sides?

(1:18:46) Speaking of talkback. Can you source talkback audio from anywhere else besides the headset connection?

(1:19:29) I have to use OREI cat5e because of my hall systems

(1:20:28) Q: What is the ATEM Streaming Bridge for ATEM Mini Pro used for? other than multiple callers. Does it add sdi to a mini hdmi pro?

(1:22:05) Join with the 22 People who have clicked on the LIKE Button

(1:22:17) The Studio Camera should have a talkback connector. Maybe it only shows up when the camera is connected via SDI. But I don't know much about talkback on ATEM.

(1:24:16) Can talkback be managed from the software interface?

(1:24:47) Q Select the engineering button under talkback?

(1:25:15) Captive Tech Based Solution is a part of CITVS (Customized & Interactive TV Service) building on RTMP and Powershell. Has got video capabilities. Yet to drive on Talkback.

(1:25:28) Atem mini doesn't have power switch...... Does it spoil my interface while it shutdown suddenly

(1:27:16) so for ur 4up streaming solution. Teranex converter Quad SDI To 12G SDI-- STREAM ENCODER - - Teranex 12G SDI to Quad 12G 4 sources in on remote side one stream to 4 sources out local side. :-)

(1:29:05) Not related to the HD8 - what is the best live streaming software/app that can be used w/ "backstage" and the ATEM (backstage bringing on guests)

(1:30:12) just backstage

(1:30:13) Backstage is more like a Green Room holding area.

(1:31:14) There is no Multi view in Atem Mini...... What is the alternative solution for multi view (can we change hdmi output settings to multi view ---- I didn't find it in Atem mini)

(1:33:01) Ecaam using interview mode to bring in guest is a possible solution.

(1:33:56) SEETEC ATEM display...

(1:34:16) does stream yard work w/ ATEM

(1:35:32) I'm sensing an impending purchase of a CNC device. 🤔

(1:37:29) Eric, are you suggesting we're editing gcode on stream six months from now?

(1:37:37) Aaron's ultimate studio desk 😂 cnc, laser cutter, and 3d printer

(1:38:28) Q - I want to integrate blackmagic constellation in to my church vimx livestream setup. what would recommend?

(1:39:36) does insta 360 works in yolobox pro for 360° view?

(1:40:52) I'm building a 4'x8' CNC machine feet from my desk. lol

(1:41:06) 🙂 Anytime you want to do a podcast together, let me know. 😀

(1:41:14) Any success w/ ATEM Extreme ISO and OBS?

(1:43:27) Any House files videos coming up?

(1:44:12)