June 5, 2022
(3:12) Hello from Dripping Springs, Texas. Aaron must be doing some last minute adjustments to the new studio layout and doesn't have the map running yet..
6 Minute Media
(4:43) Your vox is way louder then the music
(5:00) audio is.not clipping
(5:42) Studio light on back wall is in bad location…unless you move 4-6” to your left.
(6:57) Monitor make?
Here to Record
(7:25) Isn't everything in a constant flux in that studio 😀
(7:51) Hi John .. mayby Aaron will install the Flux Compensator to the next Stream ..
(8:08) so... do you still think Yolo is reliable piece of gear? 😉
(13:47) @Aaron Parecki .. no worries .. the Audio on the Bike ride was fine .. for the circumstances acceptable ..
(14:16) @Aaron Parecki don't even get me started about the Hero 10 and the MediaMod. I have a bug in relation to HDMI, that I filed in November with them and they still haven't fixed it.
(14:22) @Aaron Parecki if you record with the Hero 10, while using HDMI it'll drop your HDMI to 480p, additionally to the 1 sec audio delay, that has always been there all the way back to the Hero 5.
(18:23) @Aaron Parecki you can achieve automatic clean feed using the Labs firmware and a QR code.
(23:55) @Aaron Parecki the 480p HDMI issue is specific to the Hero 10, it did not exist on the Hero 9
(25:13) Now that you have an X32 rack are you going to sell the XR18?
(26:02) Will the rack be good as you can not reach it from behind? Or will you turn it with the face to the desk?
(26:38) @Aaron Parecki i have 45 GoPros all the way from the Hero 2 to the Hero 10, so I pretty much know all the bugs and shortcomings 🙂
(26:56) Q: what is the model of your new monior? Is it good?
IT Never Gets Old
(28:47) Q: Adding caster wheels to the rack would allow you to turn it slightly to get to the back
(29:15) .. currently the X32 is here around 1K .. deliver time around 4-5 weeks ..
(29:38) What are the studio dimensions?
(30:04) Q: in which program did you plan the studio?
(33:34) Imperial system, hehehe
(33:38) 3x6 m for the rest of us 😉
(34:04) it was supposed to be a coffee table for doing packshots agains grey wall 😉
(35:04) @Aaron Parecki .. I think you need 1 or 2 50" Monitors for the Multiview .. mounted directly on the wall and a bit higher so you also could use the lower Monitor on the desk .
Rogers Outdoor Productions
(35:49) Q: When you get your new switcher installed what will you use for an encoder to live stream?
(38:10) What is that app?
(38:42) Like the color scheme. Tom Buck like.
Here to Record
(38:53) Just posted updates to H2R Gear today - H2R Layouts updates are tomorrow!
IT Never Gets Old
(39:00) Q: what is the device next to rack between the tables?
(39:54) So, are keeping the video hub?
(41:45) Q: Where did you get your X32 Rack from? I'm looking at various consumer retailers, and none of them have it right now.
(42:57) Q - will you put some wheels under tha Rack? .. it might be a good Idea for the future ..
(43:21) Q - Are you streaming right now with Atem Mini or Yolobox?
(43:58) Q: how many backend people are involved in the production today?
(44:13) I have a HDMI rats nest behind my desk... Can you recommend a thin HDMI cable that you use?
(45:27) I've been using fiber HDMI cables now. don't trust electrical hdmi.
(46:00) Q: Do you send the Audio to ATEM Mini or do you connect to directly to encoder?
Here to Record
(48:58) Thanks to MADI-gic
(49:04) Q: How do you connect the Mic1 jn ATEM Mini. RCA to 3.5 unbalanced?
(49:40) Q: Any Grant (BMD) NAB interview moments that have popped up in your memory banks?
(50:36) @Aaron Parecki i've send you the links for Labs firmware and settings on Photo Josephs discord. The HDMI setting is hard to find, so i've specificly linked that.
(50:59) x32 is a good Alternative for audio handling? I used a Beringer x1204, but my ATEM has been choking.
(52:18) @Aaron Parecki .. you could also go on the Dante path .. a plugin card is around $500 for the x32 ..
(52:37) Q - do you plan some kind of Cabel management under the Desk? .. I use from IKEA the SIGNUM system .. it can be mounted under the Desk .. maybe its also available in the US ..
(53:37) I've been having issues with My ATEM Mini loosing audio. my ATEM Mini Extreme got busted with no audio at all and got it replaced by BMD.
(57:07) I am sure you mentioned it before but why the new stand for the atems don't have the rear feet?
(59:19) The new bike mount is the bomb-diggity.
(59:37) are you planning to make a stream deck stand for the new stand?
(1:00:49) now that new Rodecaster has tripod and vesa mount points i think more and more people will look how to mount their Atems the same way 🙂
(1:01:01) Q - any plan on a additional Hyperdeck Shuttle to attach it on the side of the Extreme Stand?
(1:03:28) Q: Why was there such a delay in the Joseph stream?
(1:08:38) I’m late but I will watching the replay. Thank you for all the great advice
(1:08:55) Q: Are you getting a new ATEM Constellation HD?
Noel Del Pilar
(1:09:06) Love my Hyperdeck Shuttle!
Here to Record
(1:09:09) I think it would be better to tilt the HyperDeck Shuttle HD up since the Scroll Wheel actually blocks the buttons usually.
(1:09:30) @Aaron Parecki make the HD shuttle attachment flat and not at the same angle.
(1:09:51) Q - do you think Elgato will make a larger Streamdeck - like the Extreme size .. I think that would be very useful also for the new Constelation series ..
(1:10:22) @Aaron Parecki I do agree with @Here to Record. Tilt Shuttle HD up a bit would be easier to reach the buttons.
(1:10:47) Curious to see if there is a FB group where users post how they are using the ATEM stands with the different attachments.
(1:11:06) there might be something new in streamdeck line (pobably under a new name) as some european resellers are discounting the XL
(1:11:32) Q: Are you going to live stream while you are building your 4m/e system?
(1:12:18) Q: Is There any delay issues in Lumix Gh5
(1:12:46) Please no Instagram. Live on YouTube
(1:12:55) I get a ton of latency on GH5 HDMI out.
(1:13:26) 80ms measured.
(1:13:57) Enough to be a problem for focus pulling.
(1:14:08) Elgato did just have their 10th anniversary, where everything was discounted. Are those discounts a holdover from that, or is that just the XL that's on sale?
(1:14:25) Yolobox can stream to IG?
(1:16:06) Q: Why do you prefer not to stream via ATEM?
(1:17:32) The more I think of it, I was getting 160ms latency but that was a combination of 80ms out from GH5 plus another 80ms from Hollyland Mars 400S pro.
(1:18:07) @Here to Record @Aaron Parecki slight angle on the shuttle HD would be good, but not as much angle as the ATEM. my shuttle at slight angle due to ethernet & HDMI cables are short, holding the back up.
(1:18:52) Q - Why USB-C out signal on Atem Mini line-up is much darker than HDMI out?
(1:19:53) Q: Hi aaron, just joined in! Regarding to your bicycle live stream, you mentioned GP10 isn't good for livestreaming, was the GP7 good enough considering the builtin HDMI that's in it? Thanks!
(1:20:47) Q: which wireless transmitter on handheld cam?
(1:22:13) @JP Lanuza many IRL streamers have been sticking with the Hero 7 because the MediaMod in the 8, 9 and 10 just introduced bulk and issues
(1:22:27) So apart from the general low light issues with GoPros, the Hero 7 is still a very valid choice and was the first to have the newer HyperSmooth stabilisation. Hero 5 was first to have any stab
(1:22:39) @Aaron Parecki Matching the Shuttle HD angle with the Extreme would make the appearance more pleasing to look at.
(1:22:56) Q: What is the fan icon on the Hollyland transmitter for?
(1:23:34) What quality do you archive your events in? File type, codec, bitrate?
(1:26:32) @Here to Record you also stopped archiving at some point right?
(1:27:11) Thanks for the clarification! 😃
(1:27:18) Q, Today On my 74th Birthday Aaron I think your studio seems to looks the BEST ever I have seen it so far.
Woodturning Tool Store
(1:27:42) What is happening with your 25k subs videos that we all submitted to you?
(1:28:57) Can I still send you a short video… ?
(1:30:33) @Jules Apatini happy birthday to you!
(1:30:35) Happy Birthday @Jules Apatini !
(1:30:51) I use holly 300 Pro Enhanced for 1 camera and the sound comes from the mixer. I have 2 other cameras connected to mini extreme iso and there is no video delay. How can i resolve this issue please ?
(1:32:36) Q: Any suggestions for HDMI over Cat6 (100' - 150')? POE adapters would be nice.
(1:32:57) @Aaron Parecki Did you know that ROKU now supports Airplay? It's great!
Noel Del Pilar
(1:33:15) Q: any recommendation of 100 feet optical fiber hdmi cable?
(1:33:38) Q: Q: what is your favorite new 2022 gear