(27:55)@Aaron Parecki Curious: Atem Switcher updates do not seem to update the firmware of the AME every time. The AME firmware number does not advance the same as the software version. Is that normal ?
(29:00)@Aaron Parecki By the way excellent video on the ATEM - YoloBox series comparison. Very informative 🙂
(29:33)Q: Was any of that recorded with the ATEM and exported with a project file?
(32:53)@Aaron Parecki Can you load a bunch of clips into resolve and render them in a way that they can all play on the hyperdeck
(54:32)Yes, I’d much rather spend more money on a Mac mini that the battery isn’t going to fail in a couple years and not be replaceable
(54:41)@Aaron Parecki - I'm planning on keeping a close eye on the "Refurbished" page on the Apple Store website, in hopes that there will be some refurbished models showing up in the next few months (1/2)
(54:52)@Aaron Parecki what about buying the new AirPods or Apple HomePod
(55:20)Next Atem may be the Atem Nano designed by Aaron Parecki?
(55:29)q didnt you have old mac book('s) to trade in to reduce the price?
(57:06)I got the iPhone 13 pro and was not expecting how pro motion adds to the experience.
(57:33)@Aaron Parecki - I know it's probably never going to happen, but I'd love to see Apple & BMD do a collab and put an M1 Pro/Max into an ATEM for like a 30-input SuperSource or something crazy like that
(57:47)@Aaron Parecki Unfortunately I’ve got a client shoot in an hour and a bit so just about to start the pre-shoot checks, have a good stream everyone!
(57:57)@Aaron Parecki the apple trade ins are also not environmentally friendly compared to someone reusing the older device. The only thing better than electronics recycling is reuse/repair.
(58:16)old iPhone can also run as a MixEffect control surface.
(59:07)Apple has a price difference on storage while selling, but it pays the same regardless storage size when trading in, not fair!
(1:12:30)@Aaron Parecki - Maybe also add a second USB-C output for recording, like ATEM?
(1:13:19)@Aaron Parecki Why not make a small interface box, no buttons, perhaps some app to control
(1:14:20)It needs to stay simple for the cost, adding too many functions will increase the cost very quickly like a MBP
(1:14:41)PK1 Mini Presentation Switcher?! Yes, I would buy one.
(1:15:45)All of us already have our wallets out ready to pay for it.....
(1:15:51)Q: How 'bout ATEM Nano with built in Streaming Bridge and BirdDog Play? 😉
(1:16:03)@Aaron Parecki I would love for it to be able to stream, it would help a lot especially even with a streaming bridge
(1:16:27)@Graham Rule the children pastor who is hosting the Children's Church with my help would love this, too.
(1:16:37)The addition of an extra input would be great because in all the conferences I have done, the audience usually has a question or some kind of participation. So it would be nice to have a 2nd shot
(1:17:08)Smash that LIKE button, helps his algorithms
(1:17:12)@Aaron Parecki I think jacks over XLR. Anyone needing to connect to a mixer should be able to adapt, but for conference, classroom etc., jacks are easy to understand for the novice...
(1:17:27)@Aaron Parecki - I think one USB for webcam out and a second USB for recording Program Out would be enough. Probably wouldn't need direct RTMP or SRT streaming, nor would it need ISO recording.
(1:18:16)Having watched you build out the Seattle mini-studio, I understand the need, desire for this device. There is a market segment, totally.
Dan C Bearded
(1:19:11)Thanks Aaron! I have seen the super chat animation with a Vmix user, so that is why I asked. As always, your setup is fantastic
(1:19:43)Q: Do you think Blackmagic will make an 4 input Atem with super source? Basically, a cheaper extreme.
Dan C Bearded
(1:20:15)Q: why is blackmagic so against power buttons? 😂
(1:20:48)@Aaron Parecki Wystarczy stworzyć tryb początkującego użytkownika w Yolo...
(1:20:54)@Aaron Parecki I had a stream fail recently because someone had accidentally pulled a jack plug out of the ATEM (the main feed from the sound desk)
(1:21:05)@Aaron Parecki Or Streaming Out, Program Recording out, and usb-c Out if you need to input on zoom,skype,MS Teams,etc
(1:21:17)Q: why not sell a cheap full featured yolobox with “pay to unlock” features?
(1:21:43)@Aaron Parecki sorry 😀 Just create a novice user mode in Yolo ...
(1:22:41)@Geert M - the cost is in construction not licensing. However there are licence features like allowing NDI in would be cool
(1:23:11)I agree that this device would be great - not for those of us who are technical enough to produce shows like this using more complex systems like ATEM or YoloBox - but for those people we work for...
(1:23:19)... so that they can run simple presentations like this themselves without needing our assistance, giving us the freedom to focus on those larger productions that truly need our technical expertise.
(1:23:57)@Aaron Parecki I saw a video of the Tech people for an university teaching professors how to use the transparent board to teach....this could very much simplify that process.
(1:24:16)Having balanced XLR (mono) and an unbalanced 1/8" mini output option would cover integrating into most house sound systems in ballroom/conference room environments.
(1:24:32)Q: You could forgo the computer's HDMI in and have a built in USB-HDMI adapter since many laptops use those anyway for lack of ports. Then you only need 2 HDMI for cameras.
(1:24:54)@Philip Meuschke I agree! I keep getting called by the church on Sunday mornings when I want to stay in bed. (Or like today when I was running a 10k race 😞 )
(1:25:09)I would rather XLR for balanced audio signal. Unbalanced always gets you at exactly the wrong time! Multi xlr/jack socket work well for options
Roland van Huet Lindeman
(1:26:01)I was watching your video this afternoon from a year and a half ago when you were still sitting in the hall. a lot has changed in that time.
(1:26:31)@Aaron Parecki Curtis Judd cancelled his stream today due to ATEM problems.... (i popped over there for a few minutes.)