Aaron Parecki

🔴 Live Q&A! Let's talk about the new Blackmagic ATEM Television Studio HD8

February 26, 2023

Questions

(5:31) Hey he made it to the studio! Nice job!

(8:10) Q: Have you ordered the new TV Studio yet?

(12:39) Madi is a big deal as well!

(13:28) Streaming Bridge in each channel

(13:31) I think the best feature is the T-bar. ;)

(13:34) Everyone loves a T bar

(13:52) Still just a 1 M/E, though...

(14:58) Q: They also have the XLR inputs on the ATEM itself.

(15:47) It´s not like the constellation it´s more like i pumped up Mini extreme!

(15:51) If I wanted to outfit a small studio or replace something like an older Tricaster, I'd buy this in a pinch.

(16:06) I’m in if they go 16!

(16:34) Definitely going to use this to do fully remote sports broadcast!

(18:49) I think this atem is perfect for the local television station here as they are volunteer based. It simplyfies a lot

(19:30) And internal recording!

(19:37) I wish the built in video storage would also be a built in HyperDeck.

(20:01) Q: Would this fit in your case size wise?

(20:33) MADI was a very frustrating choice. They should have made it a digital card slot and offer different options, most importantly Dante

(20:59) Q: If you would only have your ATEM Mini Extreme, wouls you upgrade to the ATEM TVS HD8 ISO. I think I would. But definitly not a replacement for my 2 M/E Sorry just numped in 5 minutes late

(22:51) I may be installing this soon to my church we have the m32 audio board and we’re planning on connecting that to the Atem with Madi so I can have control of a separate stream mix

(23:12) It´s always nice to have an old VideoHub laying around if you buy this one. Just like you say, a 16 input would be really nice.

(23:23) Again the main feature of the new 6k studio pro is using sensible mount (EF) instead of the useless MFT that has like four lenses with electronic control

(23:46) Q: Do you think existing ATEM Mini and ATEM Mini Extreme could work in harmony with ATEM Television Studio HD8 ?

(26:51) Q: Can you use the Streaming Bridge locally with a Atem Mini Pro as Subswitcher? (Delay)

(27:17) Q: So you figured out the Web Presenter glitch when using type?

(27:20) Q: did you ever update the software on web presenter?

(27:59) Q: What about all the SDI outs to camera?

(28:44) honestly, if there was a 2 M/E model, I would have considered selling the Constellation 2 M/E I just got for a summer gig and getting one of these instead

(28:58) Q: The is the built in stream bridge in both designs or just the ISO version.

(29:56) Could the new cameras be used in rtmp mode in houses of worship instead of sdi runs? Any latency issues with the rtmp connections?

(35:24) Didn't you have a video for testing just such latencies?

(35:34) half a second

(36:13) It's close to a second.

(36:20) The delay is not so much the network (since this is low bandwidth anyway) -- its the h264 encoder adding the bulk of the latency

(36:55) Can you stream other sources such as the BGH1 into the new Atem TV Studio?

(37:40) Q: If there is really a possibility of two-way audio within the remote camera function in the new HD8, it would definitely create some remote guest options.

(38:20) ATEM SDI Extreme ISO advantages over the new ATEM Television: 4 Aux Outputs vs 2; 9 Layers vs 8; 2 DVEs vs 1?

(39:49) Q: I wonder what would you loose if you replace the Atem 2 ME with the HD8 Iso?

(40:19) I would have liked to see a few HDMI inputs. It's just a ATEM SDI Extreme ISO in a fancy case.

(40:58) Hopefully at NAB they release an external Teranex box with 4 or 8 Streaming Bridge in side of it for remote broadcasting with the constellation

(41:19) 2TB SSD is only for a limited time

(41:52) Q: I'd like to see SRT in any new hardware. It just makes sense!

(42:07) Q: Can I connect a "GO XLR" to an ATEM mini pro for the audio mix ?

(43:13) Q: what are the benefits of SDI now that optical HDMI can provide reliable long cable runs? Is it just because it’s industry standard?

(44:20) BNC connectors are vastly superior to HDMI plugs.

(44:26) @Florian Bel It's got locking connectors.

(45:11) Q: Can you stream more than one streams into the new ATEM TV Studio HD8?

(45:46) Q: good morning Aaron, what do you think of the Blackmagic Design DeckLink Quad HDMI Recorder Capture Card

(46:27) Q: I was wondering if I could combine the. ATEM Television Studio HD8 ISO with the ATEM 2 M/E Constellation HD

(47:28) Q: why have they omitted a headphone jack do you think?

(47:31) @DigitalCreations2012 They sort of didn't, it's on the XLR5 headset connector

(48:13) bnc is also easy to repair and re-terminate.

(48:38) Q: With the BM studio camera's you can connect to the HD8 by only ethernet cable and have return feed and coms too

(48:47) And if you break a BNC on the HD8, the card is user replaceable.

(49:30) Whats your thoughts about teasing the GB Ethernet on Atem Extreme 2 years ago for

(49:39) "It has GB Ethernet built in, we're going to be able to use that for a few things in the future as well"Nearly 700 days later, you need a $4000 switcher + $2500 super 35 camera, to use that tech...

(50:20) @Aaron Parecki I don't think that's correct. The Ethernet goes to their studio 1/2 rack device, then he had SDI in and out to the Studio TV. The camera pro trunk is 10GB, TV only has 1GB

(51:19) It went with the STNG button on the Atem Extreme

(52:02) It would have been nice to have the BNC cards be single channel. Theoretically, they could then make both BNC and HDMI cards and allow you a per input choice.

(52:22) I was going to buy the EXTREME ISO SDI to record, trying to figure it out if I should now buy the new ATEM Television Studio HD8 ISO and have the extra stuff...

(53:12) One might need to upgrade to 5GB optical internet to handle 8 RTMP incoming to their home studio using the ATEM Television Studio HD8 ISO.

(53:38) This is some kind of record of viewers 181 people watching right now. Don't forget to "like" this video 👍

(54:11) BMD has a bad habbit to add unusable buttons on devices. STING on the Extreme and AUDIO on the Advanced Panel. At least the AUDIO function on the new TVS seems stellar

(54:19) Aaron needs people to continue to buy the ATEM Mini series until he had designed a stand for the new kit

(55:34) Did you hit background music button by accident?

(55:42) PK1 Desk incoming!

(55:48) Can you design a cover for the stupid FTB button? 😅

(56:37) @Aaron Parecki note the photofrom last week showed the 10" lilliput and the ipad holder..

(57:46) regular size ipad

(57:50) @Aaron Parecki now's your chance to create friction fit plastic covers for those buttons.

(57:59) Will the stream to the new atem be in sync?!

(58:18) Aaron thank you for contributing amazing Information to the pro audio and video community thank you

(1:01:02) 3.2K Likes ⁉

(1:02:02) Another great livestreaming community is @TheEmilyDBaker; she is currently livestreaming the Murdaugh Murders trial gavel to gavel. Lately she has been getting 40k-50k viewers - the chat MOVES!

(1:02:23) The commentators knows all the flights coming/going, the plane types, all the thingz

(1:03:38) Office Hours Global is a great live streaming community. They have a 2 hour show everyday on youtube

(1:04:25) Q Do you know what the new ATEM software update includes?

(1:05:49) I don't think I've updated our ATEM since the install. I should get on that.

(1:05:59) @Aaron Parecki Live ATC mobile app (paid) gets you live ATC control tower channel audio.

(1:06:18) @Aaron Parecki You could probably also track weather balloons and micro satellites with your Pi.

(1:06:26) Do you think they will release a Blackmagic ATEM TV Studio 4K? and what on the line up of ATEM minis? and ATEM EXTREME 4K maybe?

(1:08:02) If I send 8 streams to it from the internet will they be in sync?!

(1:08:24) @Alexandre Linhares I wonder how long before someone gets 8 cameras to test that.

(1:08:36) 4K ISO recording would be nice so that it could be reframed at 1080p for later upload.

(1:08:46) Really hoping they don't release a constellation 4k as I just bought an 8K constellation

(1:09:24) Q: Sorry for going out of topic...Have you reviewed the LiveU solo pro yet ?

(1:10:33) Black Magic PTZ at NAB?. Maybe see you at the meet up!

(1:12:20) The Soggy Plywood Castle

(1:13:02) Your remote mics seemed to be cutting in and out on that video.

(1:13:49) Looking forward to NAB!

(1:14:03) Q: House files I was expecting a drone fly through, especially going full height in lobby/hall

(1:14:38) superchat cheer volume is quite low

(1:15:16) Prop guards are good!

(1:15:19) @Clifford Bradbury yes the full height atrium shot, going up, up, up

(1:15:29) Hi Aaron and everyone, I did the update I can see the new Sources Tab I'm using a Mini Pro. I will have to try it with the Streaming Bridge to see if it works.

(1:16:07) Late greetings from Rancho Mirage, California

(1:17:02) Prop guards will limit your altitude to 90 ft, over weight issue

(1:19:10) Q: When did they add a 'power to the mic' option for the ATEM Mini's?

(1:19:14) Q: And does that just mean a ~5V power source for the low-end condensor type mics, or a 48V power source for a real condensor mic (I would doubt this)?

(1:19:34) Q: How do you connect the RPC2 to the newATEM Television Studio HD8 ISO?

(1:20:36) Want to finish the show with a challenge... try my diagonal question early in the show

(1:20:53) Q: The Yolobox Pro has a nifty two-up layout option where you can split the screen diagonally. Can this be done with an ATEM?

(1:27:40) Nice!! That was quick

(1:27:43) Can you add a border?

(1:27:47) Will that dvd state be saved in software control?

(1:28:17) Q: Why a macro instead of Companion?

(1:30:26) But you can you use companion to call the macro afterward

(1:30:29) I never think about the Companion message sending/latency delays that would occur when you're trying to combine USK/DSK without missing frames.

(1:31:38) Q There was a question about Lily's stream I'd like to see answered too.

(1:31:40) Q: Did you get to update Lilly's chat so more visible for long questions?

(168:13:15) Great show as always. Thanks.